|
|
KFX 400 Piston Kits CP Pistons Standard Bore, Big Bore
and High Compression KFX400 Piston
CP Pistons, the best pistons for those that demand the
ultimate in engine performance!
KFX 400 piston kits for high performance and racing are available here for the KFX400 quad racers. Standard bore size and
big bore 434cc and 450cc KFX 400 CP Pistons Kawasaki atv kits and high compression KFX 400 piston kits are all available here. These
forged pistons will work with oversize valves as well as high lift camshafts as they
include oversize valve reliefs. They incorporate a "X" style forging for greater
strength, durability and reduced weight. Along with the full radius dome designs, high
performance piston rings and lightweight piston pins, these pistons offer the highest
quality and are engineered for maximum power output.
KFX 400 CP Pistons 2003 - 2006 Kawasaki KFX400 Piston Kits
Stock Standard Bore size is 90mm (3.543") Stock Stroke is 62.4mm (2.464")
Cometic top end gasket sets are available separately, but
are not included with the piston kit. The matching top end gasket kit for each application
is listed in the table, along with the individual piston kit info. |
| Part # |
Bore Size |
Size |
Compression |
Top End Gasket Kit # |
Installation
Notes |
Piston Kit Price |
| cp m4028 |
90mm std. |
398 cc |
12.5-1 |
e-mail us |
deglaze cylinder |
$229.00
 |
|
| cp m3003 |
+4mm 94mm big bore |
434cc |
12.5-1 |
cp c7979 |
bore and replate |
$229.00
|
|
| cp m3004 |
+5mm 95mm big bore |
450 cc |
12.5-1 |
cp c3138 |
bore and replate |
$229.00
|
|
Installation Notes:
- Deglaze Cylinder When replacing a piston with the same stock bore size as the original factory stock size you do not need to have your cylinder modified. We do recommend that you deglaze the cylinder. This involves running a hone through the cylinder to remove glazing and provide the best possible surface for piston ring seal. This will improve power and piston and ring life.
- Bore and Replate Cylinder When installing an oversize, big bore piston, the cylinder must be bored to the correct new bore size to allow installation of your oversize piston. The cylinder then must be re-plated and finish honed to provide the proper surface for your piston and rings to work in, and provide best power and longevity.
|
|
Kit Contents
|
Standard Features included in Kawasaki KFX400 CP Piston Kit:
|
Piston |
Double forced pin oilers
|
Fully CNC machined
|
Piston Pin |
Accumulator groove
|
Pin lock removal grooves
|
Piston Rings |
Anti detonation grooves
|
X-style forging
|
Pin retaining locks |
Light weight piston pin
|
Balanced to + or - 1 gram
|
|
FULL RACE upgraded model piston shown in pictures.
CP Pistons racing pistons are
used by top professional riders and teams including:
| Team Suzuki |
Chad Reed |
Mike Alessi |
Ryan Dungey |
| MDK Wonder Warthog |
Heath Voss |
Tyler Bowers |
Eric Sorby |
| MDK/Lucas Oil/Yamaha |
White Bros. Yamaha |
Rick Ware Racing |
Team Solitaire |
Use This Motocross Training Program and Gain More From the Time You Spend Training |
 |
There is a great new training aid now available which promises great improvements in your motocross training results. If you are tired of poor results, slowing down toward the end of your motos, getting passed due to getting tired late in the motos, or running out of gas before your bike does, then this program may be great for you.
|
|
|
The piston and gaskets listed on this page fit the
following model year Kawasaki KFX400 Quad:
2003 2004 2005 2006 KFX400
© Motorsports Parts Corporation T/A Campbell Enterprises. All rights reserved
|
