Campbell Enterprises Header
Shop By Vehicle
Shop By Brand
Search For Parts
LiveZilla Live Chat Software

Molnar and Manley Big Block Mopar H Beam Connecting Rods Chrysler Dodge Plymouth Mopar 413 426W 440 Rods and PRO Series I Beam Stroker Rods

Molnar Big Block Mopar Rods

 

molnar connecting rod

molnar technologies h beam rod edge

Big Block Chrysler Molnar Technologies Connecting Rods

Molnar Technologies H Beam big block Chrysler rods are machined from billet 4340 steel, and then heat treated to provide improved strength. To make the rods even stronger, they are shot peened to which also increases fatigue life. All Molnar big block mopar connecting rods are fitted with highly durable premium bronze bushings for use with floating pin type pistons. Each rod set includes ARP2000 fasteners, moly lubricant and installation guidelines.

All Molnar rods are finished in the United States at the Molnar Technologies shop in Michigan. Critical rod dimensions are are held to very precise tolerances of +/- .0001 of an inch, which is the tightest tolerance you will find in the performance and racing aftermarket.

Molnar Connecting Rods Part Numbers and Application Info

  • Length Length of the connecting rod, as measured center to center, in inches.
  • Weight Weight in grams, of one complete connecting rod assembly
  • Notes Additional information about specific applications
  • Bolt Size Bolt diameter in inches, Rods come with ARP2000 fasteners installed
  • Rod Pin Size Crank rod journal diameter
  • Pin Size Piston pin diameter, in inches or millimeters
  • BE Width Width of the crankshaft end of one rod
  • PE Width Width of the piston end of one rod
  • Part Number Molnar Technologies Connect Rod set part number
  • Price The price shown is for a complete set of rods for the engine.
Description and Length Weight Notes Bolt Size Rod Pin Size Pin Size BE Width PE Width Part Number

Chrysler Dodge Plymouth Mopar Big Block 383 400 426 Hemi 440 BBM

6.760 Chrysler Wedge with .990 Pin     7/16 2.375 .990 1.017 1.140 DH6760YTB8-A

Add To Cart
6.760 Chrysler Wedge 852   7/16 2.375 1.094 1.017 1.140 DH6760YYB8-A

Add To Cart
6.860 Chrysler Hemi with .990 Pin     7/16 2.375 .990 1.017 1.140 DH6860YTB8-A

Add To Cart
6.860 Chrysler Hemi 853   7/16 2.375 1.031 1.017 1.140 DH6860YVB8-A

Add To Cart

Big Block Mopar and 426 Hemi Rods with Big Block Chevy Rod Journal Diameter

6.760 844 Chrysler Wedge with .990 Pin & BB Chevy Journal diameter and BBM rod journal width 7/16 2.200 .990 1.017 1.140 DH6760VTB8-A

Add To Cart
6.860 849 Chrysler 426 Hemi with .990 Pin and BB Chevy Journal diameter and BBM rod journal width 7/16 2.200 .990 1.017 1.140 DH6860VTB8-A

Add To Cart
6.860 879 Chrysler 426 Hemi with 1.030 Pin and BB Chevy Journal diameter and Big Block Chevy rod journal width 7/16 2.200 1.030 0.992 1.065 CH6860VVB8-A

Add To Cart
7.100 838 BBM Wedge and 426 Hemi with 2.200 rod journal and .990 Wrist Pin, standard BBM rod journal width 7/16 2.200 .990 1.017 1.140 DH7100VTB8-A

Add To Cart

Chrysler 354 Hemi

6.625 Chrysler 354 Hemi 759   7/16 2.250 0.984 0.994 1.140 DH6625WSB8-A

Add To Cart

Chrysler 392 Hemi

6.950 Chrysler 392 Hemi 826 Use CB-1512 or equivalent bearing 7/16 2.375 0.984 0.994 1.158 DH6950YSB8-A

Add To Cart

Manley BBM Connecting Rods

Manley Big Block Mopar Connecting Rod Logo

Big block Mopar H Beam, 4340 forged steel connecting rods from Manley offer superior strength, dependability, and performance for your Chrysler Dodge Plymouth Mopar RB series engines, 413, 426 Wedge and 440 engine. These rods are also a great choice for any big block Mopar stroker engine.

The 6.760 rod length is also very popular for use in modified and racing Mopar B series engines, 361, 383 and 400, and stroker engines built using these block sizes.

Manley Performance Products Mopar 440 H beam connecting rods are high quality precision made parts and are a great choice for street car rebuilds, muscle cars, street rods, hot rods and all out racing engines. They are also very popular for mud bog vehicles as well as big block Mopar boat engines.

In addition to these Manley connecting rods, we also have big block Mopar rods made by Eagle, K1 and Molnar Technologies. You can view those manufacturers rods on these pages:

 

Manley NHRA Stock Super Stock Legal Rods Logo The big block Mopar connecting rod sets listed below are NHRA legal for Stock and Super Stock competition classes.

 

Chrysler 413 426 Wedge 426 Hemi 440 and Stroker Engine Rods

Manley 4340 Forged H Beam Rod Features

  • Manufactured from 4340 forgings
  • Heat treated, stress relieved, shot peened and magnafluxed
  • Weight matched sets +/ - 1.5 grams
  • Cap fasteners are premium 7/16" ARP 8740 cap screws
  • Horsepower range for these rods is 800 H.P. at 8000 rpm
  • Horsepower range is affected by rpm, stroke and piston weight
  • 6.765 is the stock rod length for the 413 426W and 440
  • 6.865 is the stock rod length for the 426 Hemi
Manley Big Block Mopar H Beam Connecting Rods Image

 

Manley Chrysler 413 426 440 Connecting Rods

Description Center to Center Big End Bore Pin Bore Weight Part #

Chrysler Dodge Plymouth Mopar 413 426 Wedge 440 H Beam Rods

stock length with .990" pin 6.765" 2.500" .9911" 887g 14074-8
stock length with 1.094" stock size pin 6.765" 2.500" 1.0951" 867g 14076-8

Chrysler Dodge Plymouth Mopar 426 Hemi H Beam Connecting Rods

stock length with 1.031" stock size pin 6.865" 2.500" 1.0321" 891g 14077-8
stock length with .990" pin 6.865" 2.500" .9911" 903g 14080-8

The Big Block Chrysler H Beam rods listed above can be fitted with an ARP 2000 rod bolt upgrade for $69.95 additional. To order rods with upgraded bolts, please contact us for assistance or just note "upgrade to ARP2000" in the note section of our order form.

 

Common Features

Attribute Dimension
big end width 1.015"
pin end width 1.250"

Manley Big Block Mopar H Beam Rod part numbers 14074-8, 14076-8, 14077-8 & 14080-8 are accepted NHRA Legal for Stock & Super Stock Drag Racing use.

 


Manley PRO Series Mopar 426 Hemi & Big Block Mopar Stroker I Beam Rods

We also offer the premium Manley PRO series Big Block Mopar and 426 Hemi I Beam stock hemi stroke and stroker connecting rods. These are the ultimate Mopar 426 Hemi and 440 stroker I beam rods available from Manley. The PRO series rods are available in stock length and pin sizes, as well as 426 hemi and 440 stroker long rods. The stroker rods are also available for use with stock hemi and big block rod journal sizes, as well as models for use with big block chevy rod journals. The smaller bbc rod journals allow for easier fitment in custom applications, due to the smaller diameter of the bbc journal allowing the rod big end to be made with a smaller dimension.

Chrysler 426 and Big Block Mopar Stroker Rods

Pro Series I Beam Hemi Rods

  • Forged from 4340 aircraft quality vacuum degassed material
  • Fully machined to produce the lightest and strongest rod possible
  • Shot peened after machining to Mil specs and 100% individually magnafluxed
  • Cap fasteners are 7/16" ARP 2000 cap screws
  • Horsepower range for these rods is 850 H.P. at 8000 rpm
  • Horsepower range is affected by rpm, stroke and piston weight
  • Stock 426 Hemi rod length is 6.865
  • Stock 440 rod length is 6.765
Manley 426 Hemi PRO series I beam rod image

 

Manley Chrysler 426 Hemi and 440 I Beam Connecting Rods and Stroker Rods

All prices are for a complete set of 8 connecting rods

Description Center to Center Big End Bore Pin Bore Weight Part No.

stock length with 1.031" pin, stock hemi length and pin

6.865" 2.500" 1.0321" 905g

man 14177-8

$0.00
Contact us for availability!

.235" longer with 1.031" pin, hemi long stroker rod 7.100" 2.500" 1.0321" 940g

man 14184-8

$0.00
Contact us for availability!

.235" longer with .990 pin, hemi or big block mopar wedge stroker rod 7.100" 2.500" .9911" 945g

man 14185-8

$0.00
Contact us for availability!

.235" longer with 1.031" pin and BB Chevy rod journal, special hemi long stroker rod, requires hemi crank with big block chevy rod journal dia. 7.100" 2.325" 1.0321" 935g

man 14186-8

$0.00
Contact us for availability!

.235" longer with .990" pin and BB Chevy rod journal, hemi or big block mopar wedge stroker rod, requires hemi crank with big block chevy rod journal dia. 7.100" 2.325" .9911" 940g

man 14187-8

$0.00
Contact us for availability!

The Big Block Chrysler I Beam rods listed above can be fitted with an ARP Custom Age 625+ rod bolts as an upgrade for an additional charge. To order rods with upgraded bolts, please contact us for assistance and we will be happy to help.

426 Hemi Big Block Mopar Manley Pro Series I beam connecting rods common dimensions

Attribute Dimension
big end width 1.015"
pin end width 1.180"

 

 


 

Links to related pages on our website:

 

 

Campbell Enterprises Performance Parts | About | Contact Info | Privacy Policy | Terms
copyright © Motorsports Parts Corporation T/A Campbell Enterprises. All rights reserved