Ford FE Engine Pistons 390 406 410 427 428 Ross Pistons Mercury FE Piston Sets
ROSS Ford FE flat top pistons in this section are machined on new style
forgings for maximum strength and minimum weight. Valve pockets are machined to fit FE
Ford Medium Riser, High Riser, Edelbrock 6005, 6006, 6007, 6008, and Mercury
and Ford FE series engine 390, 406, 410, 427, and 428 heads. Suitable for nitrous
systems of 250 horsepower or less. Aircraft quality pins included are 2.930 length, .145
wall, 144 gram weight and are retained by double spirolox. Ring sizes are 1/16, 1/16,
3/16. Top ring is .280 down for relieved blocks. Not recommended for forced induction
systems.
Ford Big Block FE Series Forged Piston Sets by Ross
If you do not see the FE Ford series V8 engine pistons with the specs
you need below, please visit our custom piston page and we
will be glad to assist you with a custom set of pistons for your FE Ford or Mercury FE
engine project.
Ross
Flat Top FE Ford Mercury Engine 390 406 410 427 428 Piston List
We also have the matching plasma moly Ford FE file fit piston rings available for all of
these piston sets.
-
Vol=displacement of the valve pockets
-
Wt= Weight in grams
-
Pin Diameter is .975 in.
-
For use with a 6.488 in. long connecting rod
-
Compression based on a 72cc head chamber
|
Part # |
Engine |
Bore |
Stroke |
Vol |
Wt |
Comp.
|
C.H. |
Plasma Moly
Piston Ring
Set # |
| ross 99601 |
390 Ford
Pistons |
4.080 |
3.780 |
-5 |
589 |
10-1 |
1.775 |
rs-9771-85 |
| ross 99602 |
410 Ford
Pistons |
4.080 |
3.980 |
-5 |
602 |
10.5-1 |
1.675 |
rs-9771-85 |
| ross 99603 |
428 Ford
Pistons |
4.160 |
3.980 |
-5 |
577 |
10.8-1 |
1.675 |
rs-10375-40 |
| ross 99605 |
427 Ford
Pistons |
4.255 |
3.780 |
-5 |
609 |
10.7-1 |
1.775 |
rs-9745-05 |
| ross 99606 |
427 Ford
Stroker Pistons |
4.255 |
3.980 |
-5 |
591 |
11.2-1 |
1.675 |
rs-9745-05 |
ROSS Ford FE engine pistons in this section are
manufactured on new style forgings for maximum strength and minimum weight. Dome top part
# 99610 is for use with stock Medium Riser and Edelbrock 6007 or 6008 heads. Reverse dome
part # 99604 is for use with Edelbrock 6005, 6006, 6007, 6008 and Ford 390, 406, 427.
Suitable for nitrous systems of 250 horsepower or less. Not recommended for forced
induction applications. Aircraft quality pins included are 2.930 length, .145 wall, 144
gram weight, and are retained by double spirolox. Ring sizes are 1/16, 1/16, 3/16.
Ross Dome and
Reverse dome top Ford FE Engine and Mercury FE 427 pistons and Ford 428
Piston set
-
Vol=displacement of the dome or dish
-
Wt= Weight in grams
-
Pin Diameter is .975 in.
-
For use with a 6.488 in. long connecting rod
-
Compression based on a 72cc head chamber
|
Part # |
Make |
Bore |
Stroke |
Vol |
Wt |
Comp.
|
C.H. |
Plasma Moly
Piston Ring
Set # |
| ross 99604 |
428 Ford
Pistons |
4.160 |
3.980 |
-17.4 |
594 |
9.6-1 |
1.675 |
rs-10375-40 |
| ross 99610 |
427 Ford
Pistons |
4.263 |
3.780 |
5 |
626 |
11.4-1 |
1.775 |
rs-9745-15 |
If you do not see the FE engine pistons with the specs you need, we also have a wide range of Diamond forged pistons for the FE engines. We do not have them on our website yet, but they are available. Please contact us for assistance with FE pistons with different specs.
We also offer H beam connecting rods, crankshafts, gasket sets, bearings, etc. for the Ford and
Mercury FE engines. Please contact us for assistance.
High Performance FE Ford Books and DVDs
Ross Racing
Pistons General Information Page
Ford
Ross Pistons Page
|
