Campbell Enterprises Header
Shop By Vehicle
Shop By Brand
Search For Parts
LiveZilla Live Chat Software

CP Honda D16A6 Pistons

CP Pistons Honda D16A6 Pistons

CP D16A6 forged pistons are compatible with oversized valves and high lift camshafts. CP Carrillo products represent the highest quality and are engineered for maximum power. Pistons can be ordered with gas ports, skirt coating, ceramic top coating, and stronger wrist pins if desired. To order a set with any of these options, please include a message in the note section of the order form during our check out process, or you may contact us in advance for more info on these options.

CP Standard features include:

  • Deep valve reliefs accommodate high lift camshafts
  • Larger valve reliefs for +1mm valve sizes
  • Custom skirt cam and barrel design
  • Accumulator grooves
  • High strength aluminum forgings
  • High performance rings included
  • Fully CNC machined and balanced to +/- 1 gram
  • Wrist pins included at no additional cost
  • Double pin oilers force fed from oil ring groove
  • Pick lock grooves for easy lock removal
  • Pin fitting included

 

CP Pistons Forged D16A6 Piston and Ring Sets

CP Pistons Forged D16A6 Piston and Ring Sets

  • Bore Size Cylinder bore size piston is designed to work in, listed in inches and millimeters
  • Relative Size Denotes whether this bore size is stock standard size, or an oversize listed in millimeters
  • CR Compression Ratio
  • Crankshaft Stroke Designed to work with stock crank stroke of 90mm
  • Connecting Rod Length Designed to work with stock rod length of 137mm
  • Wrist Pin Diameter 19mm
  • Compression Height 1.163 inches This is the distance from the centerline of the wrist pin bore to the top flat surface of the piston.
  • Ring Widths Ring grooves are machined to work with 1.0mm, 1.2mm, 2.8mm rings
  • WHAT’S INCLUDED 4 forged pistons, 4 Wrist Pins, pin retention locks and premium piston ring set

 

Bore
Inches
Bore
MM
Size
MM
Stroke
MM
Rod
Length
MM
C.H. Compression Piston Set
2.953 75 STD 90 137 1.163 9 SC7055

Add To Cart
2.972 75.5 +0.5mm 90 137 1.163 9 SC7056

Add To Cart
2.953 75 STD 90 137 1.163 11 SC7125

Add To Cart
2.972 75.5 +0.5mm 90 137 1.163 11 SC7126

Add To Cart

More general and technical information about CP Carrillo and our complete listing of all available CP products is here > CP Racing Pistons Catalog

 

Custom D16A6 Pistons

If you do not see a shelf stocking part number set here with the specifications that you need, we can provide you with a set of custom pistons built to your exact requirements. Please contact us if you would like to discuss a set of CP customs and we will be happy to work with you to insure you get exactly the Honda D16A6 engine pistons you need.

 

Campbell Enterprises Performance Parts | About | Contact Info | Privacy Policy | Terms
copyright © Motorsports Parts Corporation T/A Campbell Enterprises. All rights reserved