Campbell Enterprises Header
Shop By Vehicle
Shop By Brand
Search For Parts
LiveZilla Live Chat Software

CP Pistons Hyundai BETA 2.0 Pistons

CP Hyundai Beta 2.0 Pistons

Do you want more horsepower and torque from your engine? We have the solution with these CP Pistons high performance Hyundai 2.0 Beta forged pistons which are compatible with stock and oversized valves as well as stock and high lift camshafts. These superior piston sets are available for use with turbochargers, superchargers, nitrous and normally aspirated engines. The Beta 2.0 piston sets listed on this page are for the first generation 2.0 Beta engine, also referred to as the Beta 1.

CP Carrillo products represent the highest quality and are engineered for maximum power. Pistons can be ordered with gas ports, skirt coating, ceramic top coating, and stronger wrist pins if desired. To order a set with any of these options, please include a message in the note section of the order form during our check out process, or you may contact us in advance for more info on these options.

Hyundai 2.0 Beta 1 CP Pistons Standard features include:

  • Deep valve reliefs accommodate high lift camshafts
  • Larger valve reliefs for +1mm valve sizes
  • Custom skirt cam and barrel design
  • Accumulator grooves
  • High strength aluminum forgings
  • High performance rings included
  • Fully CNC machined and balanced to +/- 1 gram
  • Wrist pins included at no additional cost
  • Double pin oilers force fed from oil ring groove
  • Pick lock grooves for easy lock removal
  • Pin fitting included

CP Pistons Beta 2.0 Pistons and Ring Set Specs

NOTE: The sets listed below are only for the first generation Beta 1 2.0L engine. We have other pistons made for use in the Beta 2 series which uses a shorter engine block deck height.

Hyundai 2.0 Forged Pistons

  • Bore Size Cylinder bore size piston is designed to work in, listed in inches and millimeters
  • Relative Size Denotes whether this bore size is stock standard size, or an oversize listed in millimeters
  • CR Compression Ratio
  • Crankshaft Stroke Crank stroke the pistons are designed to work with.
  • Connecting Rod Length Designed to work with stock rod length of 146.1mm
  • Wrist Pin Diameter 20mm
  • Compression Height This is the distance from the centerline of the wrist pin bore to the top flat surface of the piston.
  • Ring Widths Ring grooves are machined to work with 1.0 x 1.2 x 2.8mm rings
  • WHAT’S INCLUDED 4 forged pistons, 4 Wrist Pins, pin retention locks and premium piston ring set

 

Bore
Inches
Bore
MM
Size
MM
Stroke
MM
Rod
Length
MM
C.H. Compression Piston Set
3.228 82.00 STD 93.5 146.1 1.220 8.8 SC7480

Add To Cart
3.248 82.50 +0.5mm 93.5 146.1 1.220 8.8 SC7481

Add To Cart

More general and technical information about CP Carrillo and our complete listing of all available CP products is here CP Racing Pistons Automotive Catalog

Custom Hyundai 2.0 Pistons

If you do not see a shelf stocking part number set here with the specifications that you need, we can provide you with a set of custom pistons built to your exact requirements. Please contact us for assistance with custom pistons and we will be happy to work with you to insure you get exactly the forged Beta pistons that you require for your engine.


Campbell Enterprises Performance Parts | About | Contact Info | Privacy Policy | Terms
copyright © Motorsports Parts Corporation T/A Campbell Enterprises. All rights reserved