Acura Honda K24 Pistons

Forged CP K24 pistons for use in a K24 block but with a K20a, K20a2 or K20a3 cylinder head are compatible with stock and oversized valves and stock or high lift camshafts. CP Carrillo products represent the highest quality and are engineered for maximum power. Pistons can be ordered with gas ports, skirt coating, ceramic top coating, and stronger wrist pins if desired. To order a set with any of these options, please include a message in the note section of the order form during our check out process, or you may contact us in advance for more info on these options.

NOTE: These pistons will not work with a K24 cylinder head. If you need pistons for use in a K24 block with a K24 cylinder head we will be happy to help you with a custom set of pistons for that combination.

CP Pistons K24 Pistons For use in a K24 block with K20a, K20a2 or K20a3 cylinder heads only. Will not work with K24 head. Bore Size Cylinder bore size piston is designed to work in, listed in inches and millimeters Relative Size Denotes whether this bore size is stock standard size, or an oversize listed in millimeters CR Compression Ratio Crankshaft Stroke Designed to work with stock crank stroke of 99 mm Connecting Rod Length Designed to work with stock rod length of 152 mm Wrist Pin Diameter 22mm Compression Height 1.181 inches This is the distance from the centerline of the wrist pin bore to the top flat surface of the piston. Ring Widths Ring grooves are machined to work with 1.0mm, 1.2mm, 2.8mm rings WHAT’S INCLUDED 4 forged pistons, 4 Wrist Pins, pin retention locks and premium piston ring set
Bore Inches	Bore MM	Size MM	Stroke MM	Rod Length MM	Compression	Piston Set
3.425	87	STD	99	152	9	SC7045 $1232.08 $862.46
3.445	87.5	+0.5mm	99	152	9	SC70451 $1232.08 $862.46
3.465	88	+1.0mm	99	152	9	SC70452 $1232.08 $862.46
3.504	89	+2.0mm	99	152	9	SC70453 $1232.08 $862.46
3.425	87	STD	99	152	10	SC7046 $1232.08 $862.46
3.445	87.5	+0.5mm	99	152	10	SC7047 $1232.08 $862.46
3.465	88	+1.0mm	99	152	10	SC7048 $1232.08 $862.46
3.504	89	+2.0mm	99	152	10	SC7049 $1232.08 $862.46
3.425	87	STD	99	152	FT 10.9	SC70457 $1066.04 $746.23
3.445	87.5	+0.5mm	99	152	FT 11.0	SC70458 $1066.04 $746.23
3.465	88	+1.0mm	99	152	FT 11.1	SC70459 $1066.04 $746.23
3.504	89	+2.0mm	99	152	FT 11.3	SC70460 $1066.04 $746.23
More general and technical information about CP Carrillo and our complete listing of all available CP products is here > CP Carrillo Forged Performance Pistons

Custom K24 Pistons

If you do not see a shelf stocking part number set here with the specifications that you need, we can provide you with a set of custom pistons built to your exact requirements. Please contact us if you would like to discuss a set of CP customs and we will be happy to work with you to insure you get exactly the K24 pistons you need.