CP Honda VTEC L15A Pistons for FIT Jazz and City

Forged low and high compression L15A VTEC CP Pistons are compatible with oversized valves and high lift camshafts. CP Carrillo products represent the highest quality and are engineered for maximum power. Pistons can be ordered with gas ports, skirt coating, ceramic top coating, and stronger wrist pins if desired. To order a set with any of these options, please include a message in the note section of the order form during our check out process, or you may contact us in advance for more info on these options.

Forged CP Pistons L15A VTEC Piston Sets For use in Honda City, Jazz and FIT VTEC engines Bore Size Cylinder bore size piston is designed to work in, listed in inches and millimeters Relative Size Denotes whether this bore size is stock standard size, or an oversize listed in millimeters CR Compression Ratio Crankshaft Stroke Designed to work with stock crank stroke of 89.7 mm Connecting Rod Length Designed to work with stock rod length of 149mm Wrist Pin Diameter 18mm C.H. Compression Height This is the distance from the centerline of the wrist pin bore to the top flat surface of the piston. Ring Widths Ring grooves are machined to work with 1.0mm, 1.2mm, 2.8mm rings WHAT’S INCLUDED 4 forged pistons, 4 Wrist Pins, pin retention locks and premium piston ring set
Bore Inches	Bore MM	Size MM	Stroke MM	Rod Length MM	C.H.	CR	Piston Set
2.874	73	STD	89.7	149	1.03	9	SC7037 $1232.08 $862.46
2.894	73.5	+0.5mm	89.4	149	1.03	9	SC7038 $1232.08 $862.46
2.913	74	+1.0mm	89.4	149	1.03	9	SC7039 $1232.08 $862.46
2.874	73	STD	89.4	149	1.03	11.5	SC7137 $1232.08 $862.46
2.894	73.5	+0.5mm	89.4	149	1.03	11.5	SC7138 $1232.08 $862.46
2.913	74	+1.0mm	89.4	149	1.03	11.5	SC7139 $1232.08 $862.46
More general and technical information about CP Carrillo Performance and our complete listing of CP products is here > CP Carrillo Pistons Catalog

Custom Honda L15 Pistons

If you do not see a shelf stocking part number set here with the specifications that you need, we can provide you with a set of custom pistons built to your exact requirements. Please contact us if you would like to discuss a set of CP customs and we will be happy to work with you to insure you get exactly the Honda City, Jazz or FIT pistons that you need.

We have Billet H beam rods for the L15A VTEC engine available on our site here > FIT, JAZZ, CITY L15A Connecting Rods