CP Mitsubishi EVO Pistons for EVO 8 and EVO 9 Stock and Stroker

CP Forged EVO pistons for the EVO 8 and EVO 9 series engines listed on this page are are compatible with stock and oversized valves as well as stock and high lift camshafts. We have CP forged piston sets available for use with stock stroke crankshafts and sets made specifically to work with 94mm and 100mm EVO stroker cranks.

CP Carrillo products represent the highest quality and are engineered for maximum torque, power and durability. Pistons can be ordered with optional gas ports, skirt coating, ceramic top coating, and stronger wrist pins if desired. To order a set with any of these options, please include a message in the note section of the order form during our check out process, or you may contact us in advance for more information regarding these optional features.

CP Pistons EVO Forged Pistons and Ring Sets For use in EVO VIII and EVO IX engines Bore Size Cylinder bore size piston is designed to work in, listed in inches and millimeters Relative Size Denotes whether this bore size is stock standard size, or an oversize listed in millimeters CR Compression Ratio Crankshaft Stroke Crank stroke the pistons are designed to work with. Listed are stock stroke and stroker pistons. The stock stroke length is 88mm. Connecting Rod Length Designed to work with stock connecting rod length of 150mm Wrist Pin Diameter 22mm Compression Height This is the distance from the centerline of the wrist pin bore to the top flat surface of the piston. Ring Widths Ring grooves are machined to work with 1.0mm, 1.2mm, 2.8mm rings WHAT’S INCLUDED 4 forged pistons, 4 Wrist Pins, pin retention locks and premium piston ring set
Bore Inches	Bore MM	Size MM	Stroke MM	Rod Length MM	C.H.	Compression	Piston Set
3.346	85	STD	88	150	1.37	9	SC7228 $1232.08 $862.46
3.366	85.5	+0.5mm	88	150	1.37	9	SC7229 $1232.08 $862.46
3.386	86	+1.0mm	88	150	1.37	9	SC7230 $1232.08 $862.46
3.346	85	STD	88	150	1.37	9.5	SC7199 $1232.08 $862.46
3.366	85.5	+0.5mm	88	150	1.37	9.5	SC7201 $1232.08 $862.46
3.386	86	+1.0mm	88	150	1.37	9.5	SC7203 $1232.08 $862.46
3.346	85	STD	88	150	1.37	10.5	SC7231 $1066.04 $746.23
3.366	85.5	+0.5mm	88	150	1.37	10.5	SC7232 $1066.04 $746.23
3.386	86	+1.0mm	88	150	1.37	10.5	SC7233 $1066.04 $746.23
The piston set part numbers listed below are for use with a 94mm Stroker Crank
3.346	85	STD	94	150	1.252	9.5	SC7215 $1232.08 $862.46
3.366	85.5	+0.5mm	94	150	1.252	9.5	SC7216 $1232.08 $862.46
3.386	86	+1.0mm	94	150	1.252	9.5	SC7217 $1232.08 $862.46
The piston set part numbers listed below are for use with a 100mm Stroker Crank
3.346	85	STD	100	150	1.134	9	SC7252 $1232.08 $862.46
3.366	85.5	+0.5mm	100	150	1.134	9	SC7253 $1232.08 $862.46
3.386	86	+1.0mm	100	150	1.134	9	SC7254 $1232.08 $862.46
3.346	85	STD	100	150	1.134	9.5	SC7197 $1232.08 $862.46
3.366	85.5	+0.5mm	100	150	1.134	9.5	SC7206 $1232.08 $862.46
3.386	86	+1.0mm	100	150	1.134	9.5	SC7208 $1232.08 $862.46
3.346	85	STD	100	150	1.134	10	SC7255 $1232.08 $862.46
3.366	85.5	+0.5mm	100	150	1.134	10	SC7256 $1232.08 $862.46
3.386	86	+1.0mm	100	150	1.134	10	SC7257 $1232.08 $862.46
More general and technical information about CP Carrillo and our complete listing of all available CP products is here CP Carrillo Racing Piston Sets

Custom EVO XIII and EVO IX Pistons

If you do not see a shelf stocking part number set here with the specifications that you need, we can provide you with a set of custom pistons built to your exact requirements. Please contact us if you would like to discuss a set of CP customs and we will be happy to work with you to insure you get exactly the EVO 8 or EVO 9 pistons that you require for your engine.