Duratec V6 3.0 Duratec Performance Parts Ford Duratec Rods by K1 Technologies Duratec 3.0 Connecting Rods

 

Are you building a Ford Duratec V6 engine for street, strip or racing? If so your high performance or racing 3.0 Duratec engine can greatly benefit from a change to a premium H beam 4340 billet steel connecting rod set. Performance V6 Duratec engine builders understand how important it is to build a strong rotating assembly. A serious 3.0 Duratec engine requires top quality conrods to deliver maximum performance and durability for normally aspirated engines, as well as nitrous, supercharged and 3.0 V6 Duratec turbo engines.

The 24V DOHC Duratec engine is a great platform to start with when building a light weight, high performance engine. We sell what we feel are the best Ford Duratec V6 connecting rods available. These Duratec rods are made by K1 Technologies and offer superior performance at a reasonable price. These con rods fit the V6 3.0 Duratec engine as originally equipped in several Ford and Lincoln model vehicles. These Duratec connecting rods are a direct replacement for the original Ford 3.0L V6 Duratec rods. K1 Technologies manufactures an extremely strong, 4340 Billet H beam Duratec rod set at an affordable price for the 181 CID ( 1967cc ) 3.0 Duratec engines.

 

Supercharged, Turbocharged and Nitrous Duratec Engines

When using power adders such as supercharging, turbo charging or NOS in Duratec engines one of the most critical components to upgrade is the connecting rods. The connecting rods are one of the most highly stressed components in your engine. The addition of any power adder to your 30 Duratec engine only increases the stresses placed on your con rods. Do not risk damaging your expensive performance engine by using stock rods when greatly increasing the torque and horsepower of your V6 Duratec engine by using a turbo, supercharger or nitrous.

The K1 Tech Ford 3.0 V6 Duratec connecting rods available here are machined to very exacting tolerances and are much stronger than the original equipment Ford Duratec rods. These V6 3.0L rod sets come complete with ARP rod bolts, rod installation instructions and moly lubricant.

K1 Ford 3.0L V6 Duratec rods are billet type rods designed for superior strength and dependability. K1 H beam Ford 3.0 V6 Duratec rods come complete with ARP2000 bolts. They are fitted with bronze bushings for use with full floating wrist pins. These Duratec con rods are ideal for use in high performance and racing normally aspirated 3.0 Duratec engines, V6 Duratec turbo or supercharged engines, and NOS ( nitrous ) boosted Duratec engines for street, strip, oval track or road race track use.

Ford 3.0 Duratec Connecting Rods V6 Duratec ConRods

K1 Technologies 4340 H beam steel billet 30 Duratec connecting rods are the best choice for many V6 Duratec high performance and racing engines. K1 Tech conrods are machined to some of the smallest tolerances in the automotive racing parts aftermarket. K1 Duratec rods are weight matched to plus/minus 1 gram per end from the factory. The center to center length tolerance is held to +/- .001" and the housing and pin bores are machined to +/- .0001".  Compare these specs to other aftermarket Ford Duratec performance parts manufacturers Duratec rods and then make your decision, buy the best Duratec 3.0 rods, buy K1.

K1 Tech 3.0 Ford Duratec V6 Performance Rods H Beam Duratec Racing Connecting Rod Specs Stock Duratec 181 CID 2967cc 3.0L Engine Specs Stock Bore 3.504 inch / 89mm Stock Stroke 3.130 inch / 79.5mm These rod sets include 6 billet connecting rods with 3/8" ARP 2000 rod bolts, installation instructions and ARP moly lube C-C = Length of rod, center to center, in inches Bore = Rod big end housing bore diameter in inches WPS = Wrist pin size that rod is designed to work with Wt = Weight of 1 connecting rod with bolts, in grams
Description	C-C	Bore	WPS	Wt	Part Number
V6 Ford Duratec 3.0L  Connecting Rods	5.440	2.086	21mm	535	K1  FH5440AGFB6-A $599.85 $599.79

 

Additional information about K1 Technologies and the catalog index is available here: K1 Technologies Racing Crankshafts and ConRods

When selecting Ford V6 Duratec performance parts we hope you consider including top quality K1 Technologies Duratec con rods in your project. At our discount prices, you get a high quality, serious performance connecting rod set at a great price.

In addition to these rods we also sell Ford Duratec pistons as well as piston rings, bearings, etc. If can not find the Duratec performance parts you need please feel free to contact us for assistance. We are constantly evaluating and adding performance products to our line of available products.

 

Back to Top Ford 3.0 Duratec Connecting Rods

More 3.0 V6 Ford Duratec Engine Info