Gen 2 4G63 Long Rod Stock Stroke and Stroker Pistons

CP Forged 4G63 pistons for the Gen 2 series engines listed on this page are designed for use with longer than stock connecting rods. These sets are compatible with stock and oversized valves as well as stock and high lift camshafts. Piston sets are available for use with stock stroke crankshafts and also for use with 4G63 stroker cranks.

If you need pistons for your 4G63 that work with the stock length rod, you can find them on our site here: 4G63 Gen 2 Pistons

CP Carrillo products represent the highest quality and are engineered for maximum torque, power and durability. Pistons can be ordered with optional gas ports, skirt coating, ceramic top coating, and stronger wrist pins if desired. To order a set with any of these options, please include a message in the note section of the order form during our check out process, or you may contact us in advance for more information regarding these optional features.

CP Pistons Long Rod 4G63 Forged Pistons and Ring Sets For use in Gen 2 4G63 engines with 156mm long connecting rods Bore Size Cylinder bore size piston is designed to work in, listed in inches and millimeters Relative Size Denotes whether this bore size is stock standard size, or an oversize listed in millimeters CR Compression Ratio Crankshaft Stroke Crank stroke the pistons are designed to work with. Listed are stock stroke and 4G63 stroker pistons. The stock 4G63 stroke length is 88mm. Connecting Rod Length Designed to work with special long connecting rod length of 156mm Wrist Pin Diameter 22mm Compression Height This is the distance from the centerline of the wrist pin bore to the top flat surface of the piston. Ring Widths Ring grooves are machined to work with 1.0mm, 1.2mm, 2.8mm rings WHAT’S INCLUDED 4 forged pistons, 4 Wrist Pins, pin retention locks and premium piston ring set
Bore Inches	Bore MM	Size MM	Stroke MM	Rod Length MM	C.H.	Compression	Piston Set
3.346	85	STD	88	156	1.134	8.5	SC7234 $1232.08 $862.46
3.366	85.5	+0.5mm	88	156	1.134	8.5	SC7235 $1232.08 $862.46
3.386	86	+1.0mm	88	156	1.134	8.5	SC7236 $1232.08 $862.46
3.346	85	STD	88	156	1.134	9	SC7237 $1232.08 $862.46
3.366	85.5	+0.5mm	88	156	1.134	9	SC7238 $1232.08 $862.46
3.386	86	+1.0mm	88	156	1.134	9	SC7239 $1232.08 $862.46
3.346	85	STD	88	156	1.134	10	SC7240 $1066.04 $746.23
3.366	85.5	+0.5mm	88	156	1.134	10	SC7241 $1066.04 $746.23
3.386	86	+1.0mm	88	156	1.134	10	SC7242 $1066.04 $746.23
The piston set part numbers listed below are for use in Gen 2 4G63 Stroker Engines
3.346	85	STD	94	156	1.015	8.5	SC7243 $1283.02 $898.11
3.366	85.5	+0.5mm	94	156	1.015	8.5	SC7244 $1283.02 $898.11
3.386	86	+1.0mm	94	156	1.015	8.5	SC7245 $1283.02 $898.11
3.346	85	STD	94	156	1.015	9	SC7246 $1283.02 $898.11
3.366	85.5	+0.5mm	94	156	1.015	9	SC7247 $1283.02 $898.11
3.386	86	+1.0mm	94	156	1.015	9	SC7248 $1283.02 $898.11
3.346	85	STD	94	156	1.015	10	SC7249 $1283.02 $898.11
3.366	85.5	+0.5mm	94	156	1.015	10	SC7250 $1283.02 $898.11
3.386	86	+1.0mm	94	156	1.015	10	SC7251 $1283.02 $898.11
More general and technical information about CP Carrillo and our complete listing of all available CP products is here CP Carrillo Racing Piston Sets

Custom 4G63 Gen 2 Pistons

If you do not see a shelf stocking part number set here with the specifications that you need, we can provide you with a set of custom pistons built to your exact requirements. Please contact us if you would like to discuss a set of CP customs and we will be happy to work with you to insure you get exactly the 4G63 Gen 2 pistons that you require for your engine.